Display Connectors and Cables: FPC, Board-to-Board, and Wire Harnesses
Choose display FPC, FFC, board-to-board, micro-coax, and wire harnesses using pitch, pinout, impedance, retention, flex life, current, and service …
Blogs
Insights, tips, and case studies on IPS displays, embedded display systems, optical bonding, outdoor readability, and industrial HMI applications.
Choosing a Display Bridge IC: HDMI, LVDS, eDP, and MIPI
Select a display bridge IC by protocol direction, timing, pixel clock, lane rate, color format, EDID, HDCP, scaling, power, software, PCB, and …
LCD Power Sequencing: Rails, Reset, Backlight, and Safe Shutdown
Design and test LCD power sequencing for panel rails, reset, video, bridge ICs, touch, and backlight without flashes, latch-up, or back-powering.
How to Calculate Display Interface Bandwidth and Lane Count
Calculate pixel clock, active video payload, blanking, link overhead, LVDS rate, and MIPI DSI lane count with worked embedded-display examples and …
SPI vs RGB vs MIPI DSI: Which Interface Fits a Small TFT?
Compare SPI, parallel RGB, and MIPI DSI for small TFT displays using frame rate, pin count, memory, software, EMI, power, cable length, and product …
Operating vs Storage Temperature Ratings for LCD Modules
Understand LCD operating and storage temperature ratings and how to qualify cold start, hot operation, transport, condensation, and recovery.
Choosing the Right Display Aspect Ratio for an Industrial Product
Compare 4:3, 16:9, 16:10, square, and portrait display formats using UI content, enclosure geometry, source timing, touch use, and long-term supply.
Resolution and Pixel Density: Choosing PPI for an Embedded HMI
Learn how to calculate display PPI and choose an embedded HMI resolution from viewing distance, touch size, graphics workload, interface bandwidth, …
Color Gamut, Color Depth, and Delta E for Embedded Displays
A practical guide to display color gamut, coverage, 6-bit/8-bit/10-bit depth, FRC, Delta E formulas, calibration, and embedded HMI testing.
LCD Response Time: Rise, Fall, Gray-to-Gray, and Temperature Effects
Understand LCD rise, fall, gray-to-gray response time, overdrive, motion artifacts, and why industrial display performance slows at low temperature.
What 178-Degree Viewing Angle Really Means for IPS Displays
Learn what a 178-degree IPS viewing angle really measures, why CR≥10 is not a color guarantee, and how to test off-axis display performance.
Display Brightness Explained: Nits, Luminance, and Real-World Needs
Understand display brightness, nits, luminance, measurement conditions, outdoor readability, optical losses, dimming, heat, and application targets.